Process Pumps

Process Pumps

EGGER – EO / EOS Process Pumps

The high-performance Egger EO / EOS range of process pumps are specially designed for handling a wide range of highly charged and demanding fluids, including abrasive, corrosive and viscous slurries and even multiphase suspensions. Egger EO / EOS process pumps have a long history in the pulp and paper industry where they can be found handling fibrous, air-entrained slurries with consistencies as high as 8% and gas contents of up to 25%.

With a range of special materials available, the Egger EO / EOS series offers high efficiencies, low NPSH requirements and low life cycle costs. Suitable for numerous abrasive and corrosive fluids with temperatures up to 180 degrees Celsius, Egger EO / EOS process pumps are ideal for the chemical and petrochemical industries, multiphase mixtures for reactor loops, aerated fibre suspensions in the pulp and paper industry, as well as sludge and viscous materials in wastewater technology.

Capacity Range:Flow rates up to 5400 m³/hr and heads up to 200 metres.

Materials:Available in a wide range of material options to suit any process; from grey cast iron through to wear resistant high-chrome iron, to stainless steel and nickel-based alloys.

Applications:Pulp and paper industry: waste paper and wood pulp, cellulose, rag pulp, bagasse, kaolin, etc as well as abrasive and corrosive waste waters; chemical industry: crystal suspensions, filter slurries, polystyrene beads in water, caustic solutions up to 50%, hot brine, washing powder slurries, zinc slurry, milk of lime and pigment suspensions; municipal and industrial waste water treatment plants: pre-screened waste water and sludges: steel industry: plant water, industrial effluents, scale water, scale sludge, gas and dust filter sludges and foundry sludge; fibre industry: fibre cement slurry, leather fibre, rock-wool, glass fibre, textile fibre, suspensions, nitro-cellulose and fibrous waste waters.

For further information visit http://www.eggerpumps.com/

Read more Download brochure Watch video
PREV NEXT
img0.jpg;img1.jpg;img2.jpg

[ BACK TO TOP ]

EGGER – RPP / RPG Elbow Propeller Pumps

The Egger RPP / RPG elbow propeller pump is designed for pumping large fluid volumes at very low discharge heads. Mainly used for recirculated sludge applications, as well as in pump stations and reactor loops, the RPP / RPG range can achieve very high capacities of up to 7000 litres per second whilst provide gentle fluid transport and good abrasion resistance.

Often referred to as a propeller, the special thick blade axial impeller of the Egger RPP / RPG pump has optimised hydraulics and an elongated blade profile, which over the years has been proven to provide excellent pumping efficiencies and long service lifetimes. The Egger elbow propeller pump also offers the advantage of low NPSH requirements through its high suction capability.

Capacity Range:Flow rates up to 7000 litres per second and heads up to 10 metres.

Materials:Available in welded or solid cast construction as required.

Applications:Cellulose industry, paper industry, salt industry, sewage industry, sugar industry, phosphoric acid plants, melamine plants, Vaporisation plants, reactor loops, crystallisation plants, sludge recirculation, pump stations.

For further information visit http://www.eggerpumps.com/

Read more Download brochure
PREV NEXT
img0.jpg;img1.jpg;img2.jpg

[ BACK TO TOP ]

MONO – Progressing Cavity Pumps

Pioneered in 1935, Mono is a global leader in progressing cavity pump technology, offering pumping solutions for all major sectors from water and wastewater to the mining and chemical industries. With an extensive product range, Mono progressing cavity pumps are ideal for high pressure, non-pulsing applications where viscous, aggressive, abrasive or delicate fluids require slow pump speeds and gentle handling.

Complementing Mono's world-renowned design principles include patented technologies such as the Flexishaft® and EZstrip™. With a 10 year warranty as standard, the Flexishaft® a high tensile, abrasion and corrosion resistant alternative to the generic pin joint drive system is particularly beneficial to process industries, where continuous and batch production demands the highest level of reliability. Maintenance is also made easy with the new EZstrip™ range, allowing pumps to be serviced and maintained in-situ without disconnecting pipe work

Capacity Range:Capacities up to 420 m³/hr and discharge pressures up to 72 bar. Dosing options are also available for low flow applications up to 0.6 m³/hr.

Materials:A range of housing, stator and rotor options are available depending on the application. Materials include; cast iron, stainless steel, hard chrome plated and duplex stainless steel, hastelloy, natural rubber, nitrile, fluoroelastomer and Viton, to name a few.

Applications:Acids, cosmetics, food ingredients, wine and beer, dyes, flocculants, additives, alkalis, cyanide, brewing, process mining, inks, wastewater treatment, lubricants, industrial and municipal sewage, sludge, hydrated lime slurry, latex emulsion, fruit juice and carbonated drinks, industrial chemicals, detergents, gypsum and silicate, paper stocks, starch slurries, primary and secondary sludges, hydraulic oil, crude oil, waste oil, de-watered sludge cake, viscous pastes, bentonite slurry, meat rendering, jam, honey, fats and oils, polyelectrolyte, raw sewage, aluminum sulphate, carbon slurries, coal slurries, caustic solutions, phosphoric acid.

For further information visit http://www.mono-pumps.com/

Read more Download brochure
PREV NEXT
img0.jpg;img1.jpg;img2.jpg;img3.jpg

[ BACK TO TOP ]

ABEL – High Pressure Piston Pumps

High quality, ABEL HP high-pressure piston pumps are purpose built for high-pressure, heavy-duty cleaning and process applications. They are a self-priming, single acting, positive displacement pump with either 3 or 5 cylinders, and are designed for slow speed, continuous operation. ABEL HP pumps have large valve cross-sections to ensure uniform low pulsation delivery.

When intermittent high-pressure operation is required, the pneumatic activated ABEL internal bypass system ensures trouble-free interruption of flow. With a built-in nitrogen-charged pulsation dampener, discharge safety relief valve and shock absorbing components, installation of an ABEL HP pump will provide the end user with minimal maintenance and a long operational lifetime.

Capacity Range: Capable of flow rates up to 115 m³/hr and pressures up to 250 bar.

Materials:Available in nodular cast iron, stainless steel or special bronze materials. Plungers are high quality Stainless Steel and can be supplied as hardened or with special coatings and solids ceramic materials.

Applications:For high pressure cleaning of containers, pipelines, rotary screens and filter cloths. Can also be adapted for pumping abrasive media and shear sensitive fluids.

For further information visit http://www.abel.de

Read more Download brochure
PREV NEXT
img0.jpg;img1.jpg

[ BACK TO TOP ]

OSNA – High Pressure Centrifugal Pumps

Made in Germany, OSNA specialise in producing high-pressure energy efficient centrifugal pumps, which are available in either horizontal or vertical configuration. They are fitted with optimally designed impellers and casings for high hydraulic efficiency and low noise operation, and are a competitive alternative to conventional multistage centrifugal pumps.

The modular design principle incorporated by OSNA allows for ease of servicing, and shaft sealing is available by way of mechanical seals or packed gland. Each individual application is passed through a state-of-the-art selection program to obtain the optimal pump choice. OSNA pumps are suitable for a range of clean liquids such as fresh water, boiler feed water, process water, sea water, hot water and condensate.

Capacity Range:Sizes from DN 32 to DN 80 for flow rates up to 220 m³/hr and heads up to 400 metres. Will handle temperatures up to 140 degree Celsius.

Materials:Depending on the requirements of the liquid, pump and impeller construction is available in cast iron, nodular cast iron and bronze.

Applications:For pumping clear and slightly contaminated liquids in pressure boosting plants, central heating systems, cold and hot water circulation, water supply systems, shipbuilding, the mining industry, power stations, filter units, fire extinguishing plants, irrigation plants.

For further information visit http://www.osna.de/

Read more Download brochure
PREV NEXT
img0.jpg;img1.jpg

[ BACK TO TOP ]